Jinko Solar JKM655N-66QL6-BDV-F3 N-type bifacial solar panel

Solar PanelsModel JKM655N-66QL6-BDV-F3

Jinko N-Type Bifacial Solar Panel 655 W (66QL6-BDV-F3)

A dual-glass bifacial panel that harvests light on both faces, so the same stretch of roof or ground returns more energy every year. This model: Module Efficiency 24.25%, Maximum Power (Pmax) 655W.

  • Maximum Power (Pmax): 655W
  • Module Efficiency: 24.25%

Choose the Maximum Power - Pmax

What sets the JKM655N-66QL6-BDV-F3 apart from the other 4 models in the family: Maximum Power - Pmax 655 W; Maximum Power Voltage - Vmp 42.70 V; Maximum Power Current - Imp (BNPI) 17.10 A; Short-circuit Current - Isc 16.04 A; Open-circuit Voltage - Voc 50.44 V; Module Efficiency STC 24.25 %.

AED 361incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: AED 165
  • 12-year warranty
Full SpecificationsDownload datasheet (PDF)

Jinko N-Type Bifacial Solar Panel 655 W (66QL6-BDV-F3) features

  • Light from both faces

    The rear side adds up to 85% of the front's output wherever the surface below the module is bright.

  • Keeps its output in the heat

    Production slips only 0.26% for every degree above 25 °C, so hot afternoons cost you less energy.

  • Built for storms and grit

    Certified to 5400 Pa of front load and 2400 Pa from behind, and tested against salt mist, ammonia and blown sand.

  • Cells sealed between two glass sheets

    Twin 2 mm glass faces and an anodised aluminium frame shut out moisture and hold off PID, LID/LeTID and UV ageing.

About the Jinko N-Type Bifacial Solar Panel 655 W (66QL6-BDV-F3)

A large-format N-Type Bifacial 655 W (66QL6-BDV-F3) sealed between two sheets of glass, built for commercial rooftops, car ports and ground-mounted farms rather than small domestic strings. The rear face converts light bouncing off the surface below at up to 85% of the front's yield, so pale gravel or a white roof pushes real output past the front-side rating. Heat-strengthened glass, an anodised aluminium frame and a 5400 Pa front load rating carry it through wind, salt air and dust for thirty years.

Specifications last updated 20 August 2026

Jinko N-Type Bifacial Solar Panel 655 W (66QL6-BDV-F3) full specifications

Mechanical(19)

Cell TypeN- type Mono-crystalline
Dimensions2382×1134×30 mm
Weight32.5 kg
Front Glass2.0 mm, Anti-reflection Coating
Back Glass2.0 mm, Heat Strengthened Glass
FrameAnodized Aluminium Alloy
Junction BoxIP68 Rated
Connector TypeJK03M / JK03M2 / Others*
Output Cables4.0 mm2
Pallet Dimensions2396×1110×1251mm
Maximum Power Current Imp15.34 A
Power Sorting0 ~ +3 %
Temperature Coefficient of Pmax-0.26 %/°C
Temperature Coefficient of Isc0.046 %/°C
No. of Cells264 (66×4)
Operating Temperature-40°C~ +70 °C*
Bifaciality CoefficentsφVoc: 98±5 %, φIsc: 85±5 %, φPmax: 85±5 %
Bifacial Factor85 ± 5%
Temperature Coefficient of Voc-0.24 %/°C

Electrical(6)

Maximum Power - Pmax655 W
Maximum Power Voltage - Vmp42.70 V
Maximum Power Current - Imp (BNPI)17.10 A
Short-circuit Current - Isc16.04 A
Open-circuit Voltage - Voc50.44 V
Module Efficiency STC24.25 %

Environmental(3)

IEC Fire TypeClass C
Maximum System Voltage1500 VDC (IEC)
Protection ClassClass II

Certifications(1)

  • CE

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

What are the power and efficiency specifications of the Jinko JKM655N-66QL6-BDV-F3 solar panel?

On the Jinko JKM655N-66QL6-BDV-F3 solar panel, the maximum power (Pmax) is 655 W, the module efficiency STC is 24.25% and the power sorting is 0 ~ +3 %.

What are the electrical (STC) specifications of the Jinko JKM655N-66QL6-BDV-F3 solar panel?

On the Jinko JKM655N-66QL6-BDV-F3 solar panel, the maximum power voltage (Vmp) is 42.70 V, the maximum power current (Imp) (BNPI) is 17.10 A, the short-circuit current (Isc) is 16.04 A, the open-circuit voltage (Voc) is 50.44 V and the maximum power current Imp is 15.34 A.

What are the temperature specifications of the Jinko JKM655N-66QL6-BDV-F3 solar panel?

On the Jinko JKM655N-66QL6-BDV-F3 solar panel, the temperature coefficient of Pmax is -0.26 %/°C, the temperature coefficient of Isc is 0.046 %/°C, the operating temperature is -40°C~ +70 °C* and the temperature coefficient of Voc is -0.24 %/°C.

What are the system specifications of the Jinko JKM655N-66QL6-BDV-F3 solar panel?

On the Jinko JKM655N-66QL6-BDV-F3 solar panel, the IEC fire type is Class C, the maximum system voltage is 1500 VDC (IEC) and the protection class is Class II.

What are the size, weight and cell specifications of the Jinko JKM655N-66QL6-BDV-F3 solar panel?

On the Jinko JKM655N-66QL6-BDV-F3 solar panel, the cell type is N- type mono-crystalline, the dimensions are 2382×1134×30 mm, the weight is 32.5 kg and the number of cells is 264 (66×4).

What are the frame, glass and connection specifications of the Jinko JKM655N-66QL6-BDV-F3 solar panel?

On the Jinko JKM655N-66QL6-BDV-F3 solar panel, the front glass is 2.0 mm, Anti-reflection coating, the back glass is 2.0 mm, heat strengthened glass, the frame is anodized aluminium alloy, the junction box is IP68 rated and the connector type is JK03M / JK03M2 / others*.

Customer reviews