Jinko Solar JKM650N-66QL6-BDV-F3 N-type bifacial solar panel

Solar PanelsModel JKM650N-66QL6-BDV-F3

Jinko N-Type Bifacial Solar Panel 650 W (66QL6-BDV-F3)

A dual-glass bifacial panel that harvests light on both faces, so the same stretch of roof or ground returns more energy every year. This model: Module Efficiency 24.06%, Maximum Power (Pmax) 650W.

  • Maximum Power (Pmax): 650W
  • Module Efficiency: 24.06%

Choose the Maximum Power - Pmax

What sets the JKM650N-66QL6-BDV-F3 apart from the other 4 models in the family: Maximum Power - Pmax 650 W; Maximum Power Voltage - Vmp 42.57 V; Maximum Power Current - Imp (BNPI) 17.04 A; Short-circuit Current - Isc 15.98 A; Open-circuit Voltage - Voc 50.26 V; Module Efficiency STC 24.06 %.

AED 358incl. VAT

In stock

  • Delivered within 3 business days, door to door, to every market we serve.
  • Dispatched the same business day for an order placed before 21:00 (Dubai time), or the next business day after.
  • Delivery charge: AED 165
  • 12-year warranty
Full SpecificationsDownload datasheet (PDF)

Jinko N-Type Bifacial Solar Panel 650 W (66QL6-BDV-F3) features

  • Light from both faces

    The rear side adds up to 85% of the front's output wherever the surface below the module is bright.

  • Keeps its output in the heat

    Production slips only 0.26% for every degree above 25 °C, so hot afternoons cost you less energy.

  • Built for storms and grit

    Certified to 5400 Pa of front load and 2400 Pa from behind, and tested against salt mist, ammonia and blown sand.

  • Cells sealed between two glass sheets

    Twin 2 mm glass faces and an anodised aluminium frame shut out moisture and hold off PID, LID/LeTID and UV ageing.

About the Jinko N-Type Bifacial Solar Panel 650 W (66QL6-BDV-F3)

A large-format N-Type Bifacial 650 W (66QL6-BDV-F3) sealed between two sheets of glass, built for commercial rooftops, car ports and ground-mounted farms rather than small domestic strings. The rear face converts light bouncing off the surface below at up to 85% of the front's yield, so pale gravel or a white roof pushes real output past the front-side rating. Heat-strengthened glass, an anodised aluminium frame and a 5400 Pa front load rating carry it through wind, salt air and dust for thirty years.

Specifications last updated 20 August 2026

Jinko N-Type Bifacial Solar Panel 650 W (66QL6-BDV-F3) full specifications

Mechanical(20)

Cell TypeN- type Mono-crystalline
Dimensions2382×1134×30 mm
Weight32.5 kg
Front Glass2.0 mm, Anti-reflection Coating
Back Glass2.0 mm, Heat Strengthened Glass
FrameAnodized Aluminium Alloy
Junction BoxIP68 Rated
Connector TypeJK03M / JK03M2 / Others*
Output Cables4.0 mm2
Pallet Dimensions2396×1110×1251mm
Maximum Power Current Imp15.27 A
Maximum Series Fuse Rating35 A
Power Sorting0 ~ +3 %
Temperature Coefficient of Pmax-0.26 %/°C
Temperature Coefficient of Isc0.046 %/°C
No. of Cells264 (66×4)
Operating Temperature-40°C~ +70 °C*
Bifaciality CoefficentsφVoc: 98±5 %, φIsc: 85±5 %, φPmax: 85±5 %
Bifacial Factor85 ± 5%
Temperature Coefficient of Voc-0.24 %/°C

Electrical(6)

Maximum Power - Pmax650 W
Maximum Power Voltage - Vmp42.57 V
Maximum Power Current - Imp (BNPI)17.04 A
Short-circuit Current - Isc15.98 A
Open-circuit Voltage - Voc50.26 V
Module Efficiency STC24.06 %

Environmental(3)

Protection ClassClass II
IEC Fire TypeClass C
Maximum System Voltage1500 VDC (IEC)

Certifications(1)

  • CE

Downloads & support

PDFThe manufacturer's sheet, to print or share

Frequently Asked Questions

What are the power and efficiency specifications of the Jinko JKM650N-66QL6-BDV-F3 solar panel?

On the Jinko JKM650N-66QL6-BDV-F3 solar panel, the maximum power (Pmax) is 650 W, the module efficiency STC is 24.06% and the power sorting is 0 ~ +3 %.

What are the electrical (STC) specifications of the Jinko JKM650N-66QL6-BDV-F3 solar panel?

On the Jinko JKM650N-66QL6-BDV-F3 solar panel, the maximum power voltage (Vmp) is 42.57 V, the maximum power current (Imp) (BNPI) is 17.04 A, the short-circuit current (Isc) is 15.98 A, the open-circuit voltage (Voc) is 50.26 V and the maximum power current Imp is 15.27 A.

What are the temperature specifications of the Jinko JKM650N-66QL6-BDV-F3 solar panel?

On the Jinko JKM650N-66QL6-BDV-F3 solar panel, the temperature coefficient of Pmax is -0.26 %/°C, the temperature coefficient of Isc is 0.046 %/°C, the operating temperature is -40°C~ +70 °C* and the temperature coefficient of Voc is -0.24 %/°C.

What are the system specifications of the Jinko JKM650N-66QL6-BDV-F3 solar panel?

On the Jinko JKM650N-66QL6-BDV-F3 solar panel, the maximum series fuse rating is 35 A, the protection class is Class II, the IEC fire type is Class C and the maximum system voltage is 1500 VDC (IEC).

What are the size, weight and cell specifications of the Jinko JKM650N-66QL6-BDV-F3 solar panel?

On the Jinko JKM650N-66QL6-BDV-F3 solar panel, the cell type is N- type mono-crystalline, the dimensions are 2382×1134×30 mm, the weight is 32.5 kg and the number of cells is 264 (66×4).

What are the frame, glass and connection specifications of the Jinko JKM650N-66QL6-BDV-F3 solar panel?

On the Jinko JKM650N-66QL6-BDV-F3 solar panel, the front glass is 2.0 mm, Anti-reflection coating, the back glass is 2.0 mm, heat strengthened glass, the frame is anodized aluminium alloy, the junction box is IP68 rated and the connector type is JK03M / JK03M2 / others*.

Customer reviews