Jinko Solar JKM660N-66QL6-BDV-F3 N-type bifacial solar panel

Jinko N-Type Bifacial 660 W (66QL6-BDV-F3)

A dual-glass bifacial panel that harvests light on both faces, so the same stretch of roof or ground returns more energy every year. This model: Module Efficiency 24.43%, Maximum Power (Pmax) 660W.

Maximum Power (Pmax): 660W
Module Efficiency: 24.43%

AED 364incl. VAT

In stock

Full Specifications Download datasheet (PDF)

Jinko N-Type Bifacial 660 W (66QL6-BDV-F3) features

Light from both faces

The rear side adds up to 85% of the front's output wherever the surface below the module is bright.

Keeps its output in the heat

Production slips only 0.26% for every degree above 25 °C, so hot afternoons cost you less energy.

Built for storms and grit

Certified to 5400 Pa of front load and 2400 Pa from behind, and tested against salt mist, ammonia and blown sand.

Cells sealed between two glass sheets

Twin 2 mm glass faces and an anodised aluminium frame shut out moisture and hold off PID, LID/LeTID and UV ageing.

About the Jinko N-Type Bifacial 660 W (66QL6-BDV-F3)

A large-format N-Type Bifacial 660 W (66QL6-BDV-F3) sealed between two sheets of glass, built for commercial rooftops, car ports and ground-mounted farms rather than small domestic strings. The rear face converts light bouncing off the surface below at up to 85% of the front's yield, so pale gravel or a white roof pushes real output past the front-side rating. Heat-strengthened glass, an anodised aluminium frame and a 5400 Pa front load rating carry it through wind, salt air and dust for thirty years.

Specifications last updated 20 August 2026

Jinko N-Type Bifacial 660 W (66QL6-BDV-F3) full specifications

Electrical

Maximum Power - Pmax	660 W
Maximum Power Voltage - Vmp	42.78 V
Maximum Power Current - Imp (BNPI)	17.21 A
Short-circuit Current - Isc	16.14 A
Open-circuit Voltage - Voc	50.50 V
Module Efficiency STC	24.43 %

Mechanical

Cell Type	N- type Mono-crystalline
Dimensions	2382×1134×30 mm
Weight	32.5 kg
Front Glass	2.0 mm, Anti-reﬂection Coating
Back Glass	2.0 mm, Heat Strengthened Glass
Frame	Anodized Aluminium Alloy
Junction Box	IP68 Rated
Connector Type	JK03M / JK03M2 / Others*
Output Cables	4.0 mm2
Pallet Dimensions	2396×1110×1251mm
Maximum Power Current Imp	15.43 A
Temperature Coefficient of Voc	-0.24 %/°C
Power Sorting	0 ~ +3 %
Temperature Coefficient of Pmax	-0.26 %/°C
Temperature Coefficient of Isc	0.046 %/°C
No. of Cells	264 (66×4)
Operating Temperature	-40°C~ +70 °C*
Bifaciality Coefficents	φVoc: 98±5 %, φIsc: 85±5 %, φPmax: 85±5 %
Bifacial Factor	85 ± 5%

Environmental

IEC Fire Type	Class C
Maximum System Voltage	1500 VDC (IEC)
Protection Class	Class II

Certifications

Frequently Asked Questions

The bifaciality factor is 85% (±5%) of front-side power, but the gain you actually collect depends on what sits under the module. Over a white roof or pale gravel with 135 W/m² reaching the back, a 660 W class module measures about 735 W; dark ground or a flush mount gives far less. Leave clearance behind the panel and the gain rises.

12 years on the product itself and 30 years on performance. Output is guaranteed to fall no more than 0.35% in the first year and to still be at least 88.85% of the rated figure in year 30.

Each module measures 2382 × 1134 × 30 mm and weighs 32.5 kg, so plan two people per panel when lifting. The anodised aluminium frame is certified to 5400 Pa of front load and 2400 Pa from the rear, it runs from -40 to +70 °C, and strings may reach 1500 VDC with a 35 A series fuse.

Jinko N-Type Bifacial 660 W (66QL6-BDV-F3)