Jinko Solar Panels

Jinko Solar JKM645/JKM650/JKM655/JKM660/JKM665/JKM670N-66QL6-BDX-SafetyKing-F2

A dual-glass N-type bifacial module that harvests light on both faces, so every row of the array turns more of the day into usable power.

Models Covered: JKM645N-66QL6-BDX-SafetyKing-F2, JKM650N-66QL6-BDX-SafetyKing-F2, JKM655N-66QL6-BDX-SafetyKing-F2, JKM660N-66QL6-BDX-SafetyKing-F2, JKM665N-66QL6-BDX-SafetyKing-F2, JKM670N-66QL6-BDX-SafetyKing-F2

Manufacturer: Jinko Solar Co., Ltd.

Application: Built on Jinko's N-type TOPCon cells and sealed between two 2.5 mm sheets of glass, this bifacial module also collects the light bouncing off the ground or roof beneath it, adding roughly a tenth again to what the front face alone delivers. It belongs on ground-mounted plants, carports and flat commercial roofs where that reflected light is real. A Class A fire rating, 55 mm hail testing and 7000 Pa front-load certification keep it earning through weather that stops lesser panels.

Technical Specifications

Technical Specifications
Parameter JKM645N-66QL6-BDX-SafetyKing-F2JKM650N-66QL6-BDX-SafetyKing-F2JKM655N-66QL6-BDX-SafetyKing-F2JKM660N-66QL6-BDX-SafetyKing-F2JKM665N-66QL6-BDX-SafetyKing-F2JKM670N-66QL6-BDX-SafetyKing-F2
Electrical / AC Output Data
Maximum Power (Pmax) 645 W650 W655 W660 W665 W670 W
Voltage at Maximum Power (Vmpp) 42.44 V42.57 V42.70 V42.78 V42.85 V42.92 V
Current at Maximum Power (Impp) 15.20 A15.27 A15.34 A15.43 A15.52 A15.61 A
Short Circuit Current (Isc) 15.92 A15.98 A16.04 A16.14 A16.24 A16.34 A
Open Circuit Voltage (Voc) 50.08 V50.26 V50.44 V50.50 V50.55 V50.60 V
Module Efficiency 23.88%24.06%24.25%24.43%24.62%24.80%
PV String Input Data
Cell Technology N- type Mono-crystalline
Bifaciality 85 ± 5%
Temperature Coefficient of Pmax -0.26 %/°C
Mechanical Data
Dimensions 2382×1134×30 mm
Weight 40.5 kg
Front Glass 2.5 mm, Anti-reflection Coating2.5 mm, Anti-reflection Coating2.5 mm, Anti-reflection Coating2.5 mm, Anti-reflection Coatingmm
Back Glass 2.5 mm, Heat Strengthened Glass
Frame Material Anodized Aluminium Alloy
Connector Type JK03M / JK03M2 / Others*
Pallet Dimensions 2442×1140×1251mm
Specifications (STC) Maximum Power - Pmax 645650655660665670
Number of Cells 264 (66×4)
Output Cable ≥4.0 mm2 (+): 500 mm , (-): 400 mm or Customized Length
Power Measurement Tolerance ±3%
Temperature Coefficient of Voc -0.24 %/°C
Temperature Coefficient of Isc 0.046 %/°C
Power Sorting 0 ~ +3 %
Protection Features
Junction Box IP68 Rated
Maximum Series Fuse Rating 35 A
Protection Class Class II
Additional Specifications
IEC Fire Type Class A
Operating Environment
Maximum System Voltage 1500 VDC (IEC)

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in Sudan

Market Sudan
Grid authority / regulator Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum
Quotation currency SDG
Support hours timezone Africa/Khartoum
Delivery & installation coverage Khartoum, Omdurman, Port Sudan, Kassala, Nyala

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

Key Features & Technical Highlights

  • Power from both faces: The rear side works at 85% of the front's output, turning light reflected off the surface below into extra kilowatt-hours.
  • Holds up in the heat: Output falls only 0.26% per degree above test temperature, and the module is rated to run from -40 to +70 degrees.
  • Top fire classification: Carries a Class A IEC fire type test report, the highest rating the standard awards.
  • Built for hail and wind: Tested against 55 mm hailstones and certified to 7000 Pa of front-side and 5000 Pa of rear-side load.

Frequently Asked Questions

How much extra energy does the bifacial back side actually give?

The rear face works at 85 plus or minus 5% of the front's efficiency. Measured at Jinko's bifacial conditions, with 135 W per square metre reaching the back, the module reads about 12% above its front-only rating. The real gain depends on what sits underneath: pale gravel, white membrane or a raised ground mount deliver it, dark asphalt gives back very little.

What warranty comes with the panel?

Twelve years on the product itself and thirty years of linear power output. Jinko warrants at least 88.85% of the rated power still being produced in year thirty.

What are the dimensions and weight for mounting?

Each module measures 2382 by 1134 by 30 mm and weighs 40.5 kg in an anodised aluminium frame, so plan on two people per panel on a roof. Shipping goes 36 pieces to a pallet, two pallets to a stack, and 576 pieces in a 40 ft high-cube container.