Jinko Solar JKM495/JKM500/JKM505/JKM510/JKM515/JKM520N-54HL4M-BDV-F1
A bifacial dual-glass panel that generates from both faces, so the same roof or ground area quietly returns more energy every day of its life.
Download PDF Datasheet WhatsApp UsTechnical Specifications
| Parameter | JKM495N-54HL4M-BDV-F1 | JKM500N-54HL4M-BDV-F1 | JKM505N-54HL4M-BDV-F1 | JKM510N-54HL4M-BDV-F1 | JKM515N-54HL4M-BDV-F1 | JKM520N-54HL4M-BDV-F1 |
|---|---|---|---|---|---|---|
| PV String Input Data | ||||||
| Maximum Power (Pmax) | 495W | 500W | 505W | 510W | 515W | 520W |
| Module Efficiency | 22.26% | 22.48% | 22.71% | 22.93% | 23.16% | 23.38% |
| Cell Technology | N- type Mono-crystalline | |||||
| Power Output Tolerance | 0 ~ + 3 % | |||||
| Temperature Coefficient of Isc | 0.045 %/°C | |||||
| Temperature Coefficient of Pmax | — | — | -0.29 %/°C | -0.29 %/°C | — | — |
| Temperature Coefficient of Voc | — | — | -0.25 %/°C | -0.25 %/°C | — | — |
| Electrical / AC Output Data | ||||||
| Current at Maximum Power (Impp) | 14.68 A | 14.73 A | 14.78 A | 14.83 A | 14.88 A | 14.93 A |
| Open Circuit Voltage (Voc) | 40.21 V | 40.38 V | 40.55 V | 40.72 V | 40.89 V | 41.06 V |
| Short Circuit Current (Isc) | 15.58 A | 15.63 A | 15.68 A | 15.73 A | 15.78 A | 15.83 A |
| Voltage at Maximum Power (Vmpp) | 33.72 V | 33.95 V | 34.17 V | 34.39 V | 34.62 V | 34.83 V |
| Protection Features | ||||||
| Junction Box | IP68 Rated | — | — | — | — | B B |
| Fire Rating | Class C | |||||
| Protection Class | Class II | |||||
| Mechanical Data | ||||||
| Back Glass | 2.0 mm, Heat Strengthened Glass | |||||
| Connector Type | JK03M / JK03M2 / Others* | |||||
| Dimensions (W×H×D) | 1961×1134×30 mm | |||||
| Frame Material | Anodized Aluminium Alloy | |||||
| Front Glass | 2.0 mm, Anti-reflection Coating | |||||
| Number of Cells | 108 (54×2) | 108 (54×2) | — | — | — | 1961±2mm |
| Weight | 27.0 kg | |||||
| Output Cable | 4.0 mm2 | |||||
| Packing Detail | 37 pcs/pallets, 74 pcs/stack, | |||||
| Pallet Dimensions | 1981×1140×1249 mm | |||||
Note: Specifications are based on the official Jinko Solar JKM495/JKM500/JKM505/JKM510/JKM515/JKM520N-54HL4M-BDV-F1 datasheet. Values may be subject to change; always verify against the latest manufacturer documentation before system design and procurement.
Availability & grid compliance in UAE
| Market | UAE |
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Delivery & installation coverage | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in UAE that is DEWA, ADDC, SEWA. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Both faces generate: The clear rear face converts reflected light at 80% of the front's efficiency, adding roughly a tenth more power under the datasheet's bifacial test conditions.
- Glass on both sides: Two 2 mm panes, anti-reflective at the front and heat-strengthened at the back, replace the plastic backsheet that normally ages first.
- Anti-PID guarantee: Cell processing and material control suppress potential-induced degradation, and the module is certified to IEC 62804.
- Built for wind and heat: Certified to 5400 Pa of load on the front and 2400 Pa from behind, and rated to run from -40 C to +70 C.
Frequently Asked Questions
How much extra energy does the bifacial rear side really give?
The rear face works at 80% (plus or minus 5%) of the front's efficiency, so under the datasheet's bifacial test conditions, with 135 W/m2 reaching the back, the module delivers about 10% more power. In the field the gain follows what sits under the array: a white roof or light gravel with a good air gap behind the panel gives the most, dark asphalt the least.
What warranty comes with this panel?
Twelve years on the product itself and a 30-year linear performance warranty. At the end of those three decades the module is still guaranteed to produce at least 87.4% of its rated output.
What size and weight should I plan the mounting for?
Each module measures 1961 x 1134 x 30 mm and weighs 27 kg, on an anodised aluminium frame with an IP68 junction box. It is certified to 5400 Pa on the front and 2400 Pa on the rear, so it clears normal wind and snow loading, and it ships 37 to a pallet, 888 in a 40-foot HQ container.
Availability & grid compliance in Italy
| Market | Italy |
| Grid authority / regulator | ARERA Italy |
| Quotation currency | EUR |
| Support hours timezone | Europe/Rome |
| Delivery & installation coverage | Rome, Milan, Naples, Turin |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Italy that is ARERA Italy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.